English
Español
русский
français
Deutsch
- Products
DN04 Solenoid Valve
Solenoid valve is controlled by the solenoid to move the spool, so as to control the oil flow direction.
It could be used in hydraulic system directly, control the oil on/off; also could be used as pilot valve, to control other valves.
It could be used in hydraulic system directly, control the oil on/off; also could be used as pilot valve, to control other valves.
Solenoid Valve
Product Introduction of DN04 Solenoid Valve
Technical Specification of DN04 Solenoid Valve
|
specification |
04 |
||
|
Max. working pressure (MPa) |
Port P, A, B |
25 |
|
|
Port T |
10 |
||
|
Max. Flow (L/min) |
25 |
||
|
Working fluid |
Mineral hydraulic oil; phosphate-ester |
||
|
Fluid temp. (°C) |
-20~70 |
||
|
Viscosity (mm2/s) |
2.8~100 |
||
|
Working voltage (V) |
DC12 DC24 |
||
|
Insulation grade |
IP55 |
||
|
Cleanliness |
The maximum allowable cleanliness of the oil should be according to 9th degree of Standard NAS 1638. It is suggested that the minimum filter rating should be β10≥75. |
||