English
Español
русский
français
Deutsch
- Products
Dual Cross Relief Valve Flangeable On Danfoss Motors OMS-OMP/OMR-OMT
Use and operation:
Made up by 2 relief valves with crossed tank, the valve is used to block pressure to a certain setting in the 2 ports of an actuator/hydraulic motor. It’s ideal to provide protection against sudden shock pressure and to adjust different pressures in the 2 ports of an hydraulic circuit as well. Direct flange is ideal for Danfoss motors type OMS, OMP - OMR and OMT and provides a maximum safety, very low pressure drops and solid installation.
Applications:
Flange M1 and M2 directly to the motor and connect ports V1 and V2 to pressure flow.
Made up by 2 relief valves with crossed tank, the valve is used to block pressure to a certain setting in the 2 ports of an actuator/hydraulic motor. It’s ideal to provide protection against sudden shock pressure and to adjust different pressures in the 2 ports of an hydraulic circuit as well. Direct flange is ideal for Danfoss motors type OMS, OMP - OMR and OMT and provides a maximum safety, very low pressure drops and solid installation.
Applications:
Flange M1 and M2 directly to the motor and connect ports V1 and V2 to pressure flow.
Technical specification
|
Specification |
1/2” OMS |
1/2” OMS/OMR |
3/4” OMT |
|
|
Max. flow (L/min) |
50 |
60 |
100 |
|
|
SPRINGS |
Setting range (Bar) |
10-50* |
20-100 |
10-180 Standard |
50-250 |
80-300 |
|
Pressure increase (Bar/tum)Q=4L/min |
7 |
12 |
30 |
45 |
50 |
|
|
Standard setting (Bar) |
30 |
75 |
90 |
130 |
150 |
* For Setting less than 70Bar Q=12L/min