English
Español
русский
français
Deutsch
- Products
Dual Cross Relief Valve
Usage:
It is made from 2 cross relief valves, to block actuator or ensure the pressure to a certain setting value of the motor oil ports. In theory, it can prevent pressure pulsation, also can adjust the pressure of the two circuits.
Applications:
Connect V1 and V2 to the pressure flow or to the actuator/hydraulic motor. Vice versa for the remaining ports V1 and V2. Mounting by the actuator is highly recommended in order to avoid pressure drops.
It is made from 2 cross relief valves, to block actuator or ensure the pressure to a certain setting value of the motor oil ports. In theory, it can prevent pressure pulsation, also can adjust the pressure of the two circuits.
Applications:
Connect V1 and V2 to the pressure flow or to the actuator/hydraulic motor. Vice versa for the remaining ports V1 and V2. Mounting by the actuator is highly recommended in order to avoid pressure drops.
Technical Specification
|
Model |
HYVBDC-3501C1 X |
|||||
|
Specification |
3/8 |
1/2 |
||||
|
Max pressure (Mpa) |
300 |
300 |
||||
|
Max flow (L/min) |
45 |
70 |
||||
|
Installation site |
Any |
|||||
|
Working fluid |
Mineral oil, phosphate hydraulic oil |
|||||
|
Storage temp (℃) |
-20~80 |
|||||
|
Working temp (℃) |
-10~60 |
|||||
|
Spring |
Setting range (Bar) |
20-100 |
200-180 |
50-250 |
100-300 |
|
|
Pressure increasing (Bar/turn) |
12 |
30 |
45 |
50 |
||
|
Standard setting (Bar) |
75 |
90 |
130 |
150 |
||
|
Cleanliness |
The max allowed cleanliness of the oil shall be as per standard NAS 1638, grade IX, recommendable filtering precision min β 10≥75 |
|||||
(Please consult with us if your working condition is out of the technical parameter given above.)