- Products
Non-Adjustable Proportional Flow Dividers
Use and operation:
It is non-adjustable proportional divider, flow can travel in reverse through both outlet ports and is not metered when it goes in reverse. The non-metered flow travels past the poppet, down the center of the valve, past the orifice spool and through the inlet. The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow. The ratio of outlet flows must be specified when ordering.
It is non-adjustable proportional divider, flow can travel in reverse through both outlet ports and is not metered when it goes in reverse. The non-metered flow travels past the poppet, down the center of the valve, past the orifice spool and through the inlet. The two outlet flows are pressure compensating and the sum of said flows equals the inlet flow. The ratio of outlet flows must be specified when ordering.
Technical specification
Specification |
Z1/2 |
Z3/4 |
G1/2 |
G3/4 |
SAE10 |
SAE12 |
Rated pressure (Bar) |
300 |
|||||
Inlet flow (L/min) |
30.2 to 60.5 |
60.5 to 113.4 |
30.2 to 60.5 |
60.5 to 113.4 |
30.2 to 60.5 |
60.5 to 113.4 |
Specification |
Z3/8 |
G3/8 |
Rated pressure (Bar) |
300 |
|
Inlet flow (L/min) |
30-60 |
30-60 |