English
Español
русский
français
Deutsch
- Products
Single Pilot Operated Check Valve Flangeable
Use and operation:
These valves are used to block the cylinder in one direction.
The flow is free in one direction and blocked in the reverse
direction until pilot pressure is applied. This valve can be
fixed directly on cylinder.
Applications:
Connect V1 and V2 to the pressure flow, C1 to the free flow
side of the actuator and C2 to the actuator’s side you want
the flow to be blocked.
These valves are used to block the cylinder in one direction.
The flow is free in one direction and blocked in the reverse
direction until pilot pressure is applied. This valve can be
fixed directly on cylinder.
Applications:
Connect V1 and V2 to the pressure flow, C1 to the free flow
side of the actuator and C2 to the actuator’s side you want
the flow to be blocked.
Use and operation:
These valves are used to block the cylinder in one direction.
The flow is free in one direction and blocked in the reverse
direction until pilot pressure is applied. This valve can be
fixed directly on cylinder.
Applications:
Connect V1 and V2 to the pressure flow, C1 to the free flow
side of the actuator and C2 to the actuator’s side you want
the flow to be blocked.
Technical specification:
|
Specification |
1/4” FL |
3/8” FL |
1/2” FL |
|
Pilot ratio |
1:5.5 |
1:5.5 |
1:4.5 |
|
Max flow (L/min) |
20 |
30 |
55 |
|
Max pressure (Bar) |
350 |
||
|
Cracking Pressure (Bar) |
4.5 |
4.5 |
3 |