English
Español
русский
français
Deutsch
- Products
Double Pilot Operated Check Valve For 12mm Banjo Mounting (DIN 2353)
Use and operation
Pilot check valves are used to block the actuator in both
directions. Flow is free in one direction and blocked in the
reverse direction until pilot pressure is applied. They are
easily assembled on a cylinder. We supply on request fittings
kit for mounting on cylinders with a specific centre distance.
Applications
Connect V1 and V2 to the pressure flow and C1 and C2 to
the actuator with a banjo.
Pilot check valves are used to block the actuator in both
directions. Flow is free in one direction and blocked in the
reverse direction until pilot pressure is applied. They are
easily assembled on a cylinder. We supply on request fittings
kit for mounting on cylinders with a specific centre distance.
Applications
Connect V1 and V2 to the pressure flow and C1 and C2 to
the actuator with a banjo.
Double Pilot Operated Check Valves For 12mm Banjo Mounting (Din 2353)
Technical specification
|
Specification |
3/8”L 2 CC |
1/2”L 2 CC |
|
Pilot ratio |
1:5.5 |
1:5 |
|
Max flow (L/min) |
35 |
50 |
|
Max pressure (Bar) |
350 |
|
|
Cracking Pressure (Bar) |
3 |
|