English
Español
русский
français
Deutsch
- Products
Electrical Operated Directional Control Valve
Electrical operated directional control valve uses solenoid to pull the spool and change the direction of the hydraulic oil.
Electrical operated directional control valve can directly control the flow on-off and change. It also can be used as the pilot-operated valve, which could operate other valves.
Electrical operated directional control valve can directly control the flow on-off and change. It also can be used as the pilot-operated valve, which could operate other valves.
Directional control valve
Product Introduction of Electrical Operated Directional Control Valve
Technical Specification
|
Specification |
02 |
03 |
||||
|
Working pressure (MPa) |
Oil ports P, A, B |
35 |
31.5 |
|||
|
Oil port T |
10 |
10 |
||||
|
Max. Flow (L/min) |
80 |
120 |
||||
|
Working fluid |
Mineral oil; phosphate-ester |
|||||
|
Fluid temp. (°C) |
-20~70 |
|||||
|
Viscosity (mm2/s) |
2.8~100 |
|||||
|
Working voltage (V) |
DC |
12 |
24 |
|||
|
AC |
110/50Hz |
220/50Hz |
||||
|
Max. Switch frequency (T/h) |
15000 (DC) |
7200 (AC) |
||||
|
Insulation grade |
IP65 |
|||||
|
Weight (kg) |
Single solenoid |
1.45 (DC) |
1.4 (AC) |
5.1 (DC) |
4.3 (AC) |
|
|
Double solenoids |
1.95 (DC) |
1.9 (AC) |
6.7 (DC) |
5.1 (AC) |
||
|
Cleanliness |
The maximum allowable cleanliness of the oil should be according to 9th degree of Standard NAS 1638. It is suggested that the minimum filter rating should be β10≥75. |
|||||