English
Español
русский
français
Deutsch
- Products
Single Overcentre Valve, 3 Ways
Use and operation:
These valves are used to control actuator’s movement and block in one direction in order to enable the following
Functions:
1) Under control descent of a load: load’s weight doesn’t carry it away, as the valve prevents any cavitation of the actuator;
2) Limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributor).
Applications:
Connect V2 to the pressure flow, C2 to the actuator’s side to be controlled and pil. to the pilot pressure.
These valves are used to control actuator’s movement and block in one direction in order to enable the following
Functions:
1) Under control descent of a load: load’s weight doesn’t carry it away, as the valve prevents any cavitation of the actuator;
2) Limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributor).
Applications:
Connect V2 to the pressure flow, C2 to the actuator’s side to be controlled and pil. to the pilot pressure.
Technical specification:
|
Specification |
3/8” SE 3 VIE |
1/2” SE 3 VIE |
|
Pilot ratio |
1:4.5 |
|
|
Max flow (L/min) |
40 |
60 |
|
Max pressure (Bar) |
350 |
|